Propex Heatsource HS2800 High Output Heater - Marine & Vehicle Fitting Kits

PROPEX HEATSOURCE HS2800 High Output Heater - Marine & Vehicle Kits

The PROPEX HS2800, powered by propane or butane gas, provides efficient heat without the need to run your engine. The heater includes an automatic thermostat to provide constant reassuring warmth with an output of 2.8KW.

The PROPEX HS2800 incorporates the same efficiency as the other heaters in the range and is extremely quiet in operation. The heatsource range is also efficient in its battery use, the HS2800 drawing 1.9 amps during normal operation.

Propex Heatsource HS2800 Operation Instructions - Propex Heatsource HS2800 Marine Installation Instructions

The Propex Heatsource HS2800 is designed for a multitude of marine and autmotive vehicles and is commonly fitted to boats, caravans, campervans and motorhomes. As such the Propex HS2800 can be supplied with various different installation kits to suit different applications.

Only the marine fitting kits (designed for boats) include the important bulkhead mounting bracket as well as the propex through hull fitting;

PROPEX HS2800 VEHICLE FITTING KITS

Single Outlet Vehicle Kit (V1)

• 1 metre 76mm ducting
• 1 metre 26mm combustion inlet pipe
• 0.75 metre 26mm stainless steel exhauste pipe
• Thermostat
• 3.5 metres thermostat wiring harness
• 3.5 metres 12v supply harness
• 1 directional hot air outlet
• 1 directional cool air return vent
• Hose clips, fasteners, screws, inline fuse, instructions, drilling template

Twin Outlet Vehicle Kit (V2)

• Everything as included in V1 kit plus...
• 1 open/close vent
• 1 Y branch
• Extra metre of 76mm hot air ducting
• Extra hose clips, fastenings and screws

Three Outlet Vehicle Fitting Kit (V3)

• Everything as supplied in V1 and V2 kits plus...
• Additional Y branch
• Additional open/close vent
• Extra metre of 76mm hot air ducting (3 metres in total)
• Extra clips, fastenings and screws

PROPEX HS2800 MARINE FITTING KITS

Single Outlet Marine Kit (pictured)

• 3 metres APK 76mm marine grade hot air ducting
• 2x 1.5 metres stainless steel 26mm exhaust and combustion inlet pipe
• Through hull skin fitting
• Bulkhead mounting bracket
• Thermostat
• 3.5 metres thermostat wiring harness
• 3.5 metres 12v supply harness
• 1 directional hot air outlet
• 1 directional cool air return vent
• Hose clips, fasteners, screws, inline fuse, instructions, skin fitting drilling template

Twin Outlet Marine Kit

• Everything supplied in M1 kit plus...
• 1x open/close vent
• 1x Y branch
• Extra metre of 76mm APK hot air ducting
• Extra hose clips, fastenings and screws

Three Outlet Marine Kit

• Everything as supplied in M1 and M2 kits plus...
• Additional Y branch
• Additional open/close vent
• Extra metre of 76mm APK ducting (5 metres in total)
• Extra hose clips, fastenings and screws

Propex HS2800 Technical Spec and Consumption