Product was successfully added to your shopping cart.

01480 718040   CONTACT US

0item(s)

You have no items in your shopping basket.

International Toplac Yacht Enamel Paint 750mlEnlarge « »

International Toplac Yacht Enamel Paint 750ml

5 5

Premium quality marine gloss, ideal for topsides and available in 21 lustrous colours.
£23.65

Availability: In stock

 
 

* Required Fields

£23.65

 

International Toplac Guide

Details

International Toplac Marine Gloss Paint 750ml

For full technical specification please refer to International's Toplac product datasheet.

International Toplac is a premium quality marine gloss, suitable on all common substrates. Toplac is easy to apply by brush or roller and contains UV filters as well as silicone alkyds making Toplac last up to twice as long as other conventional one-part yacht enamels. Toplac comes in a range of bright colours, which finish with a high gloss and deep lasting colour.

International Toplac Feautures

- Easy application with excellent flow poperties

- Wide range of bright and vibrant colours

- Long lasting, solid colour lasting up to twice as long as other conventional one part yacht enamels


International Toplac Yacht Enamel Application

Previously Painted Surfaces:

Good Condition:  Wash down with International Super Cleaner, rinse with fresh water and leave to dry completely. 

Poor Condition: Ensure you remove all previous coatings and prime. 

Bare wood: Prime with Yacht primer or UCP

Steel: Prime with Yacht Primer or Interprotect

Aluminium: Prime with either Yacht Primer or Interprotect

GRP: Use Super Cleaner to wash down and proceed to rinsing with fresh water and allow to dry. Rub down with 180-220 grade paper.

Aged / Weathered Gelcoats: Weathered gelcoat is more susceptible to damage as a result of solvent/moisture entrapment after painting.  This could lead to blistering of the paint film.  To prevent this three coats of Interprotect should be applied to seal the gelcoat.  The Interprotect must be overcoated with a polyurethane basecoat before you proceed to apply the Toplac. 

For ALL SUBSTRATES: Use Pre-Kote undercoat.

Method:

Smooth the undercoat using 320-400 grade (grit) wet or dry sand paper.  Use a dust wipe to remove any dust and apply 1-2 coats. 

Hints­­­­­­­­­­­­­­­:

Mixing: For optimum results stir well before you begin to use Toplac.

Thinner: Thinner No.1

Thinning: To ease application in warm or windy conditions, add up to 10% of thinners.

Cleaner: Use Thinner No.1

Number of coats: 1-2 by brush with a 12.00(m²/lt), or 8(m²/lt) by spray. 

Coverage: 9 square metres / 750 mls

INTERNATIONAL TOPLAC DRYING AND OVERCOATING INFORMATION:

Touch Dry [ISO]  
5°C 6 hours
15°C 3 hours
23°C 2 hours
35°C 1 hour
   
Overcoated by Toplac  
5°C Min: 24 hoursMax: 4 days
15°C Min: 16 hoursMax: 3 days
23°C Min: 8 hoursMax: 2 days
35°C Min: 6 hoursMax: 1 day

INTERNATIONAL TOPLAC AVAILABLE COLOURS:

- Atlantic Grey

- Baltic Blue

- Bondi Blue

- Bounty

- Danube Blue

- Donegal Green

- Ivory

- Jet Black

- Lauderdale Blue

- Mediterranean White

- Norfolk Green

- Oxford Blue

- Rescue Orange

- Rochelle Red

- Rustic Red

- Snow White

- Squall Blue

- Yellow

- Platinum *New for 2018*

- Woodward Green *New for 2018*

*These are guidelines only.  LH Jones and Son ltd (Jones Boatyard) take no responsibility for the incorrect use and subsequent damage as a result of following these guidelines.  If you have any doubt when following the above guidelines, it is advised you contact your nearest boating expert. 

**Please note, the colour swatches are to be used as a rough guide only and are not intended to accurately mimic the colour of the paint once applied. For more information, or to request a colour chart please call us on 01480 718040

Additional Information

SKU PA-TL***-750-CONFIG

Also Purchased